Optimization of Energy Generator with the Advanced Design and Fabrication of Piezoelectric Harvester System

Carlos Oblitas; Francisco Segura; Juan Anton; Manuel Ramirez; Paul Palacios; Jose Cornejo; Juan C. Chavez

doi:10.1109/ARGENCON55245.2022.9939754

Optimization of Energy Generator with the Advanced Design and Fabrication of Piezoelectric Harvester System

Carlos Oblitas, Francisco Segura, Juan Anton, Manuel Ramirez, Paul Palacios, Jose Cornejo, Juan C. Chavez

Electronic Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

The objective of this research was to create a prototype of an automatic control system for a piezoelectric generator to reduce the cost of energy consumption; its development involved the use of methodological aspects based on applied research under an experimental design where power prototypes of 20 and 30 piezoelectric transducers are built, respectively, as well as a mechanical step simulation system to perform the tests. To test the hypothesis, manufactured prototypes were used, the two 16-port analog acquisition cards, and the LABVIEW 2020; and digital multimeters as measuring instruments. The tests are carried out with footsteps and an automatic system, using transducers, energy collectors, capacitors, batteries, and LED lamps. In conclusion, that piezoelectric' application for clean energy generation is an adequate alternative and meets the objectives. Moreover, for next steps, there is a requirement to use more units in a serial-parallel configuration to get enough power.

Original language	English
Title of host publication	2022 IEEE Biennial Congress of Argentina, ARGENCON 2022
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781665480147
DOIs	https://doi.org/10.1109/ARGENCON55245.2022.9939754
State	Published - 2022
Event	2022 IEEE Biennial Congress of Argentina, ARGENCON 2022 - San Juan, Argentina Duration: 7 Sep 2022 → 9 Sep 2022

Publication series

Name	2022 IEEE Biennial Congress of Argentina, ARGENCON 2022

Conference

Conference	2022 IEEE Biennial Congress of Argentina, ARGENCON 2022
Country/Territory	Argentina
City	San Juan
Period	7/09/22 → 9/09/22

Bibliographical note

Publisher Copyright:
© 2022 IEEE.

Keywords

Mechanical step
Piezoelectric generator
Piezoelectric transducers
Serial-parallel configuration

Access to Document

10.1109/ARGENCON55245.2022.9939754

Cite this

Oblitas, C., Segura, F., Anton, J., Ramirez, M., Palacios, P., Cornejo, J., & Chavez, J. C. (2022). Optimization of Energy Generator with the Advanced Design and Fabrication of Piezoelectric Harvester System. In 2022 IEEE Biennial Congress of Argentina, ARGENCON 2022 (2022 IEEE Biennial Congress of Argentina, ARGENCON 2022). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ARGENCON55245.2022.9939754

@inproceedings{f62ad997df44417598866cf5f3c158f1,

title = "Optimization of Energy Generator with the Advanced Design and Fabrication of Piezoelectric Harvester System",

abstract = "The objective of this research was to create a prototype of an automatic control system for a piezoelectric generator to reduce the cost of energy consumption; its development involved the use of methodological aspects based on applied research under an experimental design where power prototypes of 20 and 30 piezoelectric transducers are built, respectively, as well as a mechanical step simulation system to perform the tests. To test the hypothesis, manufactured prototypes were used, the two 16-port analog acquisition cards, and the LABVIEW 2020; and digital multimeters as measuring instruments. The tests are carried out with footsteps and an automatic system, using transducers, energy collectors, capacitors, batteries, and LED lamps. In conclusion, that piezoelectric' application for clean energy generation is an adequate alternative and meets the objectives. Moreover, for next steps, there is a requirement to use more units in a serial-parallel configuration to get enough power.",

keywords = "Mechanical step, Piezoelectric generator, Piezoelectric transducers, Serial-parallel configuration",

author = "Carlos Oblitas and Francisco Segura and Juan Anton and Manuel Ramirez and Paul Palacios and Jose Cornejo and Chavez, {Juan C.}",

note = "Publisher Copyright: {\textcopyright} 2022 IEEE.; 2022 IEEE Biennial Congress of Argentina, ARGENCON 2022 ; Conference date: 07-09-2022 Through 09-09-2022",

year = "2022",

doi = "10.1109/ARGENCON55245.2022.9939754",

language = "English",

series = "2022 IEEE Biennial Congress of Argentina, ARGENCON 2022",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2022 IEEE Biennial Congress of Argentina, ARGENCON 2022",

}

Oblitas, C, Segura, F, Anton, J, Ramirez, M, Palacios, P, Cornejo, J & Chavez, JC 2022, Optimization of Energy Generator with the Advanced Design and Fabrication of Piezoelectric Harvester System. in 2022 IEEE Biennial Congress of Argentina, ARGENCON 2022. 2022 IEEE Biennial Congress of Argentina, ARGENCON 2022, Institute of Electrical and Electronics Engineers Inc., 2022 IEEE Biennial Congress of Argentina, ARGENCON 2022, San Juan, Argentina, 7/09/22. https://doi.org/10.1109/ARGENCON55245.2022.9939754

Optimization of Energy Generator with the Advanced Design and Fabrication of Piezoelectric Harvester System. / Oblitas, Carlos; Segura, Francisco; Anton, Juan et al.
2022 IEEE Biennial Congress of Argentina, ARGENCON 2022. Institute of Electrical and Electronics Engineers Inc., 2022. (2022 IEEE Biennial Congress of Argentina, ARGENCON 2022).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Optimization of Energy Generator with the Advanced Design and Fabrication of Piezoelectric Harvester System

AU - Oblitas, Carlos

AU - Segura, Francisco

AU - Anton, Juan

AU - Ramirez, Manuel

AU - Palacios, Paul

AU - Cornejo, Jose

AU - Chavez, Juan C.

PY - 2022

Y1 - 2022

N2 - The objective of this research was to create a prototype of an automatic control system for a piezoelectric generator to reduce the cost of energy consumption; its development involved the use of methodological aspects based on applied research under an experimental design where power prototypes of 20 and 30 piezoelectric transducers are built, respectively, as well as a mechanical step simulation system to perform the tests. To test the hypothesis, manufactured prototypes were used, the two 16-port analog acquisition cards, and the LABVIEW 2020; and digital multimeters as measuring instruments. The tests are carried out with footsteps and an automatic system, using transducers, energy collectors, capacitors, batteries, and LED lamps. In conclusion, that piezoelectric' application for clean energy generation is an adequate alternative and meets the objectives. Moreover, for next steps, there is a requirement to use more units in a serial-parallel configuration to get enough power.

AB - The objective of this research was to create a prototype of an automatic control system for a piezoelectric generator to reduce the cost of energy consumption; its development involved the use of methodological aspects based on applied research under an experimental design where power prototypes of 20 and 30 piezoelectric transducers are built, respectively, as well as a mechanical step simulation system to perform the tests. To test the hypothesis, manufactured prototypes were used, the two 16-port analog acquisition cards, and the LABVIEW 2020; and digital multimeters as measuring instruments. The tests are carried out with footsteps and an automatic system, using transducers, energy collectors, capacitors, batteries, and LED lamps. In conclusion, that piezoelectric' application for clean energy generation is an adequate alternative and meets the objectives. Moreover, for next steps, there is a requirement to use more units in a serial-parallel configuration to get enough power.

KW - Mechanical step

KW - Piezoelectric generator

KW - Piezoelectric transducers

KW - Serial-parallel configuration

UR - http://www.scopus.com/inward/record.url?scp=85142389984&partnerID=8YFLogxK

U2 - 10.1109/ARGENCON55245.2022.9939754

DO - 10.1109/ARGENCON55245.2022.9939754

M3 - Conference contribution

AN - SCOPUS:85142389984

T3 - 2022 IEEE Biennial Congress of Argentina, ARGENCON 2022

BT - 2022 IEEE Biennial Congress of Argentina, ARGENCON 2022

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2022 IEEE Biennial Congress of Argentina, ARGENCON 2022

Y2 - 7 September 2022 through 9 September 2022

ER -

Oblitas C, Segura F, Anton J, Ramirez M, Palacios P, Cornejo J et al. Optimization of Energy Generator with the Advanced Design and Fabrication of Piezoelectric Harvester System. In 2022 IEEE Biennial Congress of Argentina, ARGENCON 2022. Institute of Electrical and Electronics Engineers Inc. 2022. (2022 IEEE Biennial Congress of Argentina, ARGENCON 2022). doi: 10.1109/ARGENCON55245.2022.9939754

Optimization of Energy Generator with the Advanced Design and Fabrication of Piezoelectric Harvester System

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this